Twitter
Youtube
Skype

+86-13831886390(WhatsApp/WeChat)

SEARCH
Submit
Cancel

YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

Timing and method of replacement of stainless steel water filter element

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2020-01-15

Stainless steel water filter element for water treatment industry equipment filtration; To keep the equipment running normally, the filter element should be replaced regularly.
Replace the signal
1. T

Timing and method of replacement of stainless steel water filter element

Stainless steel water filter element for water treatment industry equipment filtration; To keep the equipment running normally, the filter element should be replaced regularly.
Replace the signal
1. T

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2020-01-15
Information
Stainless steel water filter element for water treatment industry equipment filtration; To keep the equipment running normally, the filter element should be replaced regularly.
Replace the signal
1. Too slow water making: whether the front filter element or reverse osmosis membrane is blocked;
2, water too fast (less than an hour to make a full bucket) : reverse osmosis membrane damage;
3. Bad taste: the life of the post-activated carbon filter element has reached the end; Removal rate of RO membrane is less than 75% : the life of reverse osmosis membrane has reached.
The calculation formula of membrane removal rate is: RO membrane removal rate =(raw water TDS value - pure water TDS value)*100%/ raw water TDS value.
Change the way
Filter element replacement process often have water overflow, please prepare a basin or towel and other cleaning equipment.
1. Turn off the electroplated ball valve and the pressure barrel ball valve;
2. Open the gooseneck faucet to drain the residual water in the pipeline;
3. After the water stops flowing out, open the filter shell with the filter shell wrench;
4. Take out the old filter element and load the new one with the same specification;
5. Apply the black "O" ring above the filter shell with lubricant such as vaseline and put the "O" ring into the groove of the filter shell;
6. Tighten the filter shell vertically to avoid shifting the "O" ring;
7. Open the electroplated ball valve and pressure barrel ball valve.

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn