YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

Maintenance and Maintenance of Dust Removal Filter

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-08-02

The dust removal filter element of the dust collector is easy to break down after a long time, so the maintenance and maintenance of dust removal filter element is particularly important. We need to d

Maintenance and Maintenance of Dust Removal Filter

The dust removal filter element of the dust collector is easy to break down after a long time, so the maintenance and maintenance of dust removal filter element is particularly important. We need to d

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-08-02
Information
In recent years, with the continuous development of science and technology, more and more industrial dust precipitators have been produced, among which dust precipitators are widely used in food, cement, chemical industry, metal processing, special powders and other industrial fields.
The dust removal filter element of the dust collector is easy to break down after a long time, so the maintenance and maintenance of dust removal filter element is particularly important. We need to do the following:
(1) determine dust collection amount of dust removal equipment and dust discharging period according to dust collection amount of dust removal system.
(2) determine the drainage period according to the air bag water accumulation of the air and water separator in the compressed air system.
(3) check regularly whether the pulse dust cleaning system of the dust collector is normal or not; if not, check emphatically whether the pulse valve diaphragm and solenoid valve fail or are damaged, and timely repair or replacement should be carried out.
(4) check the normal operation of the equipment regularly according to the fluctuation of the running resistance of the equipment.
(5) check the use of wearing parts regularly and replace them in time according to the wearing parts list.
(6) regularly add lubricating oil to the parts to be lubricated on the equipment. The sodium base grease in the gear box should be replaced every six months for the cycloidal pinwheel reducer, and the lithium base grease should be added at the bearing lubrication point once a week.
(7) check regularly whether there is any blockage in the differential pressure transmitter, and clean up in time.
The application of this kind of filter element makes the filter element of dust cement bin top dust collector not only have good acid and alkali resistance. Compared with traditional filter material, it has incomparable wear resistance and high strength. Pulse back blowing and other methods are easier to remove ash, and can be repeatedly cleaned with water. It will not damage the filter material and prolong its service life.

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn