YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

How to ensure that the filtration system is working properly

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-07-16

In order to fully guarantee the normal operation of the system, reduce the failure, and prolong the service life, the enterprise must strengthen the regular inspection and maintenance of the equipment

How to ensure that the filtration system is working properly

In order to fully guarantee the normal operation of the system, reduce the failure, and prolong the service life, the enterprise must strengthen the regular inspection and maintenance of the equipment

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-07-16
Information

In order to fully guarantee the normal operation of the system, reduce the failure, and prolong the service life, the enterprise must strengthen the regular inspection and maintenance of the equipment so that the equipment is always in good working condition.

Daily maintenance and repair personnel need to do some daily inspection records. Such as: the opening pressure of the safety valve in the hydraulic system and the inspection record of the pressure in the hydraulic system; the inspection record of each thermometer in the hydraulic system; the inspection record of the fuel tank level in the hydraulic system; the operation inspection record of the oil pump in the hydraulic system; Inspection records of activity and leakage of moving parts such as valves in the hydraulic system; inspection records of leakage of pipes and their joints in the hydraulic system.

The oil quality should be tested regularly and recorded. The general hydraulic drive system can be tested once a month, and the servo system can be tested and analyzed every two weeks. When the oil is contaminated, it is necessary to replace the filter element in time to maintain the cleanliness of the hydraulic oil. If the oil is seriously polluted, replace the oil and clean the tank. If the oil is not clean, or due to wear-resistant powder and chip powder generated by the mechanical components during operation, and external intrusion of dust, once it enters the oil, the oil quality will deteriorate, forming sludge and solid impurities, causing the sealing lip to Scratches on the surface of the component, resulting in sharp wear of the seal and increased leakage.

To control the oil temperature of the hydraulic system, the following measures can be taken: when the set value of the pressure control valve is high, the working pressure should be reduced to reduce the energy loss; the correct oil level in the fuel tank is often maintained to ensure sufficient oil Circulating cooling oil; keep the water in the cooler enough, the pipeline is smooth; when the ambient temperature is too high, the oil temperature rises, the insulation material and the reflector are used to isolate the system from the outside; the high pressure oil does not last for a long time. If necessary, return the oil tank from the relief valve to improve the circuit design when using the variable temperature pump or unloading measures.

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn