Focus on hydraulic filter element , oil gas/ oil water/ oil filter for air compressors, Air purifiers , Blower filter, Coalescing separation filter element, Industrial PP(Polypropylene) filter.
Number of views:
PE sintered filter element
Number of views:
Product serial number
Other Filter Products
PE sintered filter element is made of imported polymer PE/PP material, with stable performance, high filtration efficiency, large precision range and smooth appearance. The patented production of soft PE sintered filter element, stop overflow sintered filter element and ultra-small sintered filter element is widely used in liquid and gas filtration of chemical production, pharmaceutical, electronic and food industries.
I. introduction to PE sintered filter element
A. Features: PE sintered filter element has high filtration efficiency: for liquid-solid filtration, the minimum filtration can be about 0.45um; for gas-solid filtration, the minimum filtration can be about 0.3um; The filtration rate is 99.9%, and the filtration pressure difference is low.
B. High regeneration efficiency: the simple gas-liquid rapid backwashing and backblowing method is adopted for PE sintered filter core, which can effectively and rapidly regenerate the blocked microporous tube. When the filter tube is used for a period of time, chemical method can be adopted for regeneration, so as to prolong the service life of the filter tube.
C. PE sintered filter core is superior in chemical corrosion resistance: microporous tube is resistant to all kinds of acid, alkali, salt and most of the organic solvents, non-toxic, tasteless, no foreign matter dissolution, extremely suitable for medicine, food, chemical industry, environmental protection and other industries.
D. Material: PE sintered filter element adopts uhc as the main raw material and the material conforms to GMP and FDA requirements. Does not use adhesives, has a wide range of chemical compatibility.
E. Structure: PE sintered filter core is made by scientific formula and high temperature sintering. The diameter of the filter core is the same inside and outside. When the filter layer is thick and the working pressure is high, the solid particles are not easy to pass through.
Ii. PE sintering filter element cleaning:
(1) physical cleaning: remove the cavity, reverse wash with pure water, and then reverse blow with 0.1mpa compressed air. General cleaning 2-3 times.
(2) chemical cleaning: when used for a long time, in physical cleaning method the effect is not apparent, can put the microporous PE pipe with cavity were soaked in 48 hours, about 10% of the sodium hydroxide solution concentration, and then used in water is rinsed clean, then soak in hydrochloric acid solution concentration about 5% 4 hours, and then use clean water backwashing, final reoccupy 0.1 Mpa compressed air blow.
Iii. PE sintered filter element specifications:
General dimensions of PE sintered filter elements
Can customize all kinds of non-standard size and precision, and can produce soft sintered filter element
PE sintered filter element joints: M36, M30, M25, M22, M14, M12, etc., other specifications can be customized
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
★ LEAVE A MESSAGE