Twitter
Youtube
Skype

+86-13831886390(WhatsApp/WeChat)

SEARCH
Submit
Cancel

YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

What are the installation methods of the dust filter element

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-12-02

1. Screw type installation: a common installation method for dust collector filter cartridges on the market. It is suitable for vertical, side and oblique installation of filter cartridges, that is, t

What are the installation methods of the dust filter element

1. Screw type installation: a common installation method for dust collector filter cartridges on the market. It is suitable for vertical, side and oblique installation of filter cartridges, that is, t

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-12-02
Information
1. Screw type installation: a common installation method for dust collector filter cartridges on the market. It is suitable for vertical, side and oblique installation of filter cartridges, that is, the welding platform of the dust collector panel is extended to the height of the filter cartridge. Finally, a threaded rod is welded at the joint of the tripod. When installing, the inside of the filter cartridge passes through the threaded rod and the tripod, and the top sealing ring contacts the dust collector mounting plate. At this time, the bottom mounting hole of the filter cartridge protrudes out of the threaded rod (threaded rod and foot) The height and length of the frame should be moderate), then the nut is rotated to tighten the thread to fix the filter cartridge, and the sealing ring is fully contacted with the mounting plate.
Advantages: good sealing effect and wide range of use
2: Quick release installation: one of the more common installation forms on the market. The upper end cover of the filter cartridge adopts a six-jaw plastic end cap. The mounting cap contains a card slot that is inserted into the six-claw. The upper end of the filter cartridge is bonded to the sealing ring. Fix the dust filter cartridge mounting cap on the mounting plate, and then rotate the six claws of the dust filter cartridge into the six card slots of the mounting cap to rotate, so that the sealing ring is in full contact with the top of the mounting cap. This installation method is simple, convenient and replaceable. The filter cartridge only needs to be rotated in the opposite direction to remove the filter cartridge. This type of installation can only be vertical and there is enough space at the bottom for work.
Advantages: simple installation form, easy to replace the filter cartridge
3: Flange type installation: Unlike the screw type installation type, the flange type installation filter cartridge needs to open the top end cover of the dust collector, and the filter cartridge is installed from the top to the bottom. A little change can be made. The common form is to uniformly weld the screw rod around the hole of the dust collector installation plate. The upper end cover of the filter cartridge is in the form of a flange (that is, the diameter of the upper end cover is larger than the diameter of the filter cartridge itself). Adhesive sealing ring, 3-4 round holes are evenly distributed around the flange. When installing, the filter cartridge is installed from top to bottom. The filter material of the filter cartridge enters the interior of the dust collector and is evenly distributed on the flange of the dust filter cartridge. The small hole passes through the threaded rod which is previously welded to the upper part of the dust collector installation plate, and finally the nut is tightened and installed. If the flange diameter is small, the pressure roller can also be installed on the dust collector installation plate, and the squeeze is performed in units of rows. .
Advantages: easy to install, but the position of the screw and the position of the flange hole should be corresponding, and the nut holder should be cultivated according to the actual sample of the filter flange.

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn