Oil-gas separation filter air compressor filter, air compressor filter is the function of the host of oil-bearing compressed air into the cooler, is entered into the oil and gas filter to filter, mechanical separation of gas oil mist to intercept and aggregation, forming droplets on filter at the bottom of the return pipe to return to the compressor lubrication system, make the compressor discharge more pure, high quality compressed air; In simple terms, it is a device to remove solid dust, oil and gas particles and liquid substances from compressed air.

The oil-gas separation filter element is the key component to determine the quality of compressed air discharged from the oil injection screw compressor. With correct installation and good maintenance, the compressed air quality and filter element life can be guaranteed.

The air compressed from the head of the main engine of the screw compressor carries oil droplets of different sizes. The large oil droplets are easily separated by the oil and gas separation tank, while the small oil droplets (suspended) must be filtered by the micron glass fiber filter material of the oil-gas separation filter element. The correct selection of glass fiber diameter and thickness is an important factor to ensure the filtration effect. After the oil mist is intercepted, diffused and polymerized by the filter material, the small oil droplets quickly polymerize into large oil droplets, which pass through the filter layer under the action of pneumatic and gravity, and settle at the bottom of the filter core. The oil is continuously returned to the lubrication system through the inlet oil return pipe at the concave of the bottom of the filter element, so that the compressor can discharge relatively pure and high-quality compressed air.

Yinbeier specializes in the production of various industrial filter elements and hydraulic filter elements. And in place of PALL; HYDAC; MAHLE; PARKER; ARGO; FILTREC; STAUFF; VICKERS and other series of filter elements.