Twitter
Youtube
Skype

+86-13831886390(WhatsApp/WeChat)

SEARCH
Submit
Cancel

YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

Causes and solutions of clogging of filter bag of cloth bag filter

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-12-31

The principle that different kind of dust collector USES and way are different, but same is to be able to make the dust in flue gas and a few particles get higher level filter through certain way, hav

Causes and solutions of clogging of filter bag of cloth bag filter

The principle that different kind of dust collector USES and way are different, but same is to be able to make the dust in flue gas and a few particles get higher level filter through certain way, hav

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2019-12-31
Information
The principle that different kind of dust collector USES and way are different, but same is to be able to make the dust in flue gas and a few particles get higher level filter through certain way, having the effect that cannot ignore to the environment.
Cloth bag dust collector is a kind of common dust collector, cloth bag dust collector is widely used in industrial production, but sometimes there will be some problems, because it is mainly through the filter bag filter, so sometimes there may be filter bag jam. Why does it clog the filter bag? What are the reasons? Below, analyze the reasons and solutions for the clogging of the filter bag of the cloth bag filter.
Causes of blockage of filter bag:
The reason why the filter bag of the bag filter is blocked is that when the dust is filtered, the filtering speed is too large, the dust is too fine, and the cleaning of the filter bag itself is not in place and moisture. The filtered gas running in the bag filter is likely to exceed the standard in the design of the filter bag, which will cause these small dust to get stuck inside the filter bag fiber and cause blockage of the dust filter bag.
The solution:
The solution of the bag filter bag clogging, for example, can slow down the speed of the filtering gas, so as to reduce the pressure on the impact, and of course, the pressure of the pulse jet can be increased to some extent. The best way is to increase the area of ​​the filter, so as to ensure that the filtration speed can be reduced to some extent regardless of the amount of gas filtered, which can prolong the use time of the filter bag. In addition to these, you can also carry out the correct cleaning process, check the filter bag at any time, and so on.
In short, if the filter bag of the bag filter is blocked, it is very unfavorable for the operation and operation of the device. It is necessary to accurately grasp the cause and then solve it correctly.

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn