Twitter
Youtube
Skype

+86-13831886390(WhatsApp/WeChat)

SEARCH
Submit
Cancel

YINBEIER BLOG

We can make filters according to your requirements. Please tell me the photo and size

Advantages of using glass fiber filter material for hydraulic oil filter element

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2020-01-02

The hydraulic oil filter element USES the advantage of glass fiber filter material, the glass fiber can very effectively separate the lubricating oil droplets from the diameter of 50~ 0.01m. Very effe

Advantages of using glass fiber filter material for hydraulic oil filter element

The hydraulic oil filter element USES the advantage of glass fiber filter material, the glass fiber can very effectively separate the lubricating oil droplets from the diameter of 50~ 0.01m. Very effe

  • Categories:NEWS
  • Author:Yinbeier
  • Origin:www.inbornfilter.com
  • Published on:2020-01-02
Information
The hydraulic oil filter element USES the advantage of glass fiber filter material, the glass fiber can very effectively separate the lubricating oil droplets from the diameter of 50~ 0.01m. Very effective, better performance than other materials. Examples are as follows:
Simple working process of high efficiency condensed filter:
After the compressed air enters the middle of the filter element, it is collected by the filter layer through gravity, collision, interception and osmosis. When the oil droplets are removed by the filter layer, they are first collected. Small oil droplets are first polymerized into large oil droplets. When the mass of the large oil droplets is large enough, they will settle to the bottom of the filter layer. It then flows into the filter tank and is removed from the system by manual or automatic oil discharge device.
In the hydraulic system, the Yinbeier filter element is used to filter out solid particles and colloidal substances in the working medium, effectively controlling the pollution degree of the working medium. This series of filter elements are the substitute products for the imported filter elements. In the process of selecting and using the hydraulic oil filter elements, the approval of oil products should be paid attention to first. Generally speaking, the filter element is for the filtration of hydraulic oil, and the material will also choose the corresponding filter material, such as: glass fiber, filter paper, etc.; If there is a need to filter corrosive media, the filter material needs to be replaced, otherwise it will cause significant damage to the system.
The installation position of hydraulic oil filter element in hydraulic system usually includes the following kinds:
(1) to be installed at the oil suction port of the pump: surface filter is generally installed on the oil suction road of the pump to filter out larger impurities to protect the hydraulic pump. In addition, the filtering capacity of the filter should be more than twice of the pump flow and the pressure loss should be less than 0.02mpa. 
(2) install on the outlet oil line of the pump: the purpose of installing the oil filter here is to filter out pollutants that may invade the valve and other components. The filtration accuracy should be 10 ~ 15 μm, and it can withstand the working pressure and impact pressure on the oil road, and the pressure drop should be less than 0.35mpa. A safety valve should also be installed to prevent clogging of the oil filter.
(3) installation on the return oil circuit of the system: such installation plays an indirect filtering role. Generally, a back pressure valve is installed with the filter. When the filter blockage reaches a certain pressure value, the back pressure valve is opened. 
(4) install on the system branch oil circuit. 
(5) separate filtration system: the large hydraulic system can be specially equipped with a hydraulic pump and oil filter to form an independent filtration circuit. 
In addition to the oil filter required by the whole system, a special oil filter is often installed in front of some important components (such as servo valve, precision throttle valve, etc.) to ensure their normal operation. 
1. The need for oil. For example, insulation oil, through high precision filtration to achieve high insulation value, while large modulus gear on the impurity requirements are much more extensive.
2. Viscosity of oil. High viscosity oil can not pass through the fine screen, the need to reduce the accuracy. 
If one-sided emphasis on the cleanliness of oil and the use of precision filter, it will increase the operating cost.
 

Scan the QR code to read on your phone

Contact YinBeiEr

Would you like to speak to someone directly?

Then contact us.

Our Service

Every YinBeiEr employee you talk to is committed to these six customer service principles.

底部1

Time of issue:2019-06-27 00:00:00

facebook

底部2

Time of issue:2019-06-27 00:00:00

youtube

底部3

Time of issue:2019-06-27 00:00:00

linkedin

底部4

Time of issue:2019-06-27 00:00:00

twitter

底部5

Time of issue:2019-06-27 00:00:00

pinterest

底部6

Time of issue:2019-06-27 00:00:00

skype

YINBEIER

Copyright © 2019 Yinbeier Hydraulic Filter Co., Ltd.        冀ICP备18021275号-1      Powered by: 300.cn